How to Measure for Replacement Windows
If you are installing replacement windows, you need to take measurements that are very exact. You are using the interior of the window as your template. If you are off, even by a fraction of an inch, it will not fit at all. This is why many people will use a professional to take measurements and install replacement windows in Del Mar, CA.
The installation process is fairly straightforward. Once you put the window end, it can be affixed using caulking. These are easy to do by comparison to a new window with the frame. However, the measurements are very important.
How To Measure The Width And Height Of The Window
Taking the measurements is fairly straightforward. You will need to have a retractable ruler. It should measure things down to at least a 16th of an inch. This will allow you to get very exact measurements. You will need to do this for the width of the window, and also with height. You will start from the highest point of your existing windowsill, and then measured to the window opening. A total of three measurements must be taken. This will include measurements on both ends and one directly down the middle. In general, contractors will choose the smallest measurement when ordering a new window to replace the existing one. You will repeat this process when measuring the width.
Measuring The Depth Of The Window
On most windows, there can be parting strips and pulleys that will be in your way. You will need to ignore these as you are taking your measurements. All of this is going to be taken out because you are replacing your old window with a new one. It is recommended that you have about 3 inches of opening depth between the trim of the inside window in the outside blind stop strip. Measuring out an additional quarter of an inch would be a much more exact measurement. Once you have this measurement, you can then order the window that you need.
How To Order Replacement Windows
The easiest part of this process is ordering the window that you are going to replace. You have already done the hard work by getting exact measurements. This information can simply be handed over to someone at the store. They can use this to create the exact window that you need. If you are ordering multiple windows, just follow the same procedure. Whether this is two windows or ten windows, it is done in the same way.
In the span of a week, perhaps more, the windows that you have ordered will be ready. You can either have them delivered, or you can go to the store to pick up your order. If you have done the measurements properly, they will fit perfectly once you have removed your existing windows. You will then need to get caulking to install the wood or vinyl replacement windows in Del Mar, CA and prevent airflow along the edges. Once you have had one proper window installation, all of the others will be much easier. The key to ensuring your success is to simply get the measurements right.